The wired trigger connects through the EasyTagger’s 2.5mm (F) remote pass-through to allow triggering of the shutter while simultaneously using the EasyTagger to record GPS data.
It has single (1-shot) and continuous modes.
The cable is approximately 87.5 cm/34.4″ long.
NOTE: The remote uses a 2.5mm male plug, which connects through the EasyTag. It cannot connect directly to Nikon DSLRs except when using the 10-pin adapter. No adapter is available for 8-pin Nikon DSLRs: D90, D3100, D5000, D5100, D7000.
